Added to cart successfully!
[giaban]GH₵150.00[/giaban]
[giacu]GH₵170.00[/giacu]
[mota]
- Stock in a dry place protected from direct sunlight.
- The overlap between tapes must be a minimum of 4 cm.
- For joining different elastic bands, use weber glue MS55 .
- Raincoat.
- High elasticity.
- Quick and easy installation.
[/mota]
[availability] IN STOCK [/availability]
[varieties] Restrictions:
N/A
[/varieties]
[chitiet]
WEBERTEC IMPERBANDA
Elastic band for the waterproofing of structural joints as well as for the reinforcement and waterproofing of meetings between horizontal and vertical surfaces.
PACKAGE: 6 ROLLS
[/chitiet]
[giaban]GHC50.00[/giaban]
[giacu]GH₵60.00[/giacu]
[mota]
- Webertherm mesh 160 must be integrated in the middle of the thickness of the covering mortar.
- Overlap each stretch of mesh by at least 10 cm.
- Excellent resistance to traction and elongation.
- Resistant to alkaline media
- Contributes
deformability to mineral and polymeric coatings
[/mota]
[availability] IN STOCK [/availability]
[varieties] Restrictions:
- webertherm 160 mesh cannot be seen, it must always be coated.
[/varieties]
[chitiet]
WEBERTHEM MALIA 160
with anti- alkali surface treatment for webertherm base and webertherm base plus reinforcing mortars in webertherm exterior insulation systems and weberenova facade renovation systems
CONTAINER: 55(millimeters squared)
[/chitiet]
[giaban]GHC85.00[/giaban]
[giacu]GH₵100.00[/giacu]
[mota]
- Wet rooms, such as bathrooms, laundry rooms and sauna floor waterproofing.
- Excellent crack-bridging ability.
- Application with roller or spray.
- Part of a CE-marked weberSafe Waterproofing system
[/mota]
[availability] IN STOCK [/availability]
[varieties] Restrictions:
- Application temperatures between 5 and 35 ºC.
- Do not apply on frozen surfaces or those with a risk of frost within 24 hours after application, or exposed to full sun or very hot.
- Do not apply on surfaces with permanent humidity or with capillary rise.
- Do not apply on surfaces subject to possible movements, it does not resist cracking of the support.
[/varieties]
[chitiet]
WEBER WATERPROOFING MEMBRANE
- Hand applied
- Sprayable
To ensure adequate membrane thickness we recommend the use of a fuzzy paint roller for spreading the membrane and assessment of how much will be needed before beginning the work.
PACKAGE: 25KG
[/chitiet]
[giaban]GHC85.00[/giaban]
[giacu]GH₵100.00[/giacu]
[mota]
Features and Benefits:
- Easy to apply
- Recommended for all tile & metal sheeting roofs
- UV stable and resistant
- 350% stretch
- Non-toxic
Uses:
For water proofing of the following:
- Pitched roofs - tiled, slate, iron & timber, as well as cracked tiles, tile joints & roof ridges
- Parapet walls, flashings & small flat roofs (<20m²)
- Fish ponds, water features & water-retaining structures (use a cementitious slurry as a primer)
Use as a maintenance coat on existing acrylic waterproofing systems Including chimneys & skylights
[/mota]
[availability] IN STOCK [/availability]
[varieties]
N/A
Restrictions:
- Not to be used on Bitumen Waterproofing Products
[/varieties]
[chitiet]
WEBER BARRIER ACRYLIC FLEX
Weber Barrier acrylic flex is a pure acrylic waterproofing
polymer, modified with Latex, that allows extreme flexibility, UV stability & adhesion.
The dry film characteristics are unlike traditional waterproofing compounds, showing over 350% elongation and a life expectancy of 8 years. When reinforced with stitch bonded polyester, it forms a homogeneous seamless waterproofing system.
Support:
Clean, dry and free from dust, grease or any contamination that could impair bonding
PACKAGE: 25KG
[/chitiet]
[giaban]GHC85.00[/giaban]
[giacu]GH₵100.00[/giacu]
[mota]
- Easy to apply
- Recommended for all tile & metal sheeting roofs
- Membrane free
Benefits
- UV stable and resistant
- Built in reinforcement for extra strength
- Non-toxic
[/mota]
[availability] IN STOCK [/availability]
[varieties] Restrictions:
- Application temperatures between 5 and 35 ºC.
- Do not apply on frozen surfaces or those with a risk of frost within 24 hours after application, or exposed to full sun or very hot.
- Do not apply on surfaces with permanent humidity or with capillary rise.
- Do not apply on surfaces subject to possible movements, it does not resist cracking of the support.
[/varieties]
[chitiet]
WEBER BARRIER ACRYLIC FIBRE
An acrylic and reinforcing fibre blended waterproofing compound. Membrane free
Uses
For water proofing of the following:
- Pitched roofs - tiled, slate, iron & timber, as well as cracked tiles, tile joints & roof ridges
- Parapet walls, flashings & small flat roofs (<20m²)
- Fish ponds, water features & water-retaining structures (use a cementitious slurry as a primer)
Use as a maintenance coat on existing acrylic waterproofing systems Including chimneys & skylights
- Can be used on a wide range of surfaces
- Suitable for areas that will be permanently wet
Support:
Clean, dry and free from dust, grease or any contamination that could impair bonding
PACKAGE: 25KG
[/chitiet]